Wireless Addressable Smoke and Heat Detector

Since 2005, Fire Alarm System And Fire Suppression System Manufacturer&Whole Solution Provider

We supply whole fire alarm and suppression system include conventional fire alarm system, addressable fire alarm system, emergency light system, FM200 gas suppression system, fire pump, fire hose reel and cabinet.

Select Language

> Select Language

Home
Products

Fire Alarm System

Fire alarm system plays an important part of the fire and life safety of building and its occupants. Fire alarm system main function is to detect a fire at a sufficiently early stage so that the people who are at risk can made safely either by escaping as fast as possible or extinguishing the fire that can also reduce or prevent the property damage. Therefore, a reliability and functionality of fire alarm system as a whole is very important.

The following are the different types of the Fire Alarm System:

1. Conventional fire alarm system
a. Conventional fire alarm system uses physical cabling to connect several detectors and call points. Conventional fire alarm system has no way to identify immediately the exact location of the fire, but can be arranged in “Zones” to easily identify the location of the cause of the alarm. Its devices are cheaper but will consume more cable wires compare to addressable, since each device will be connected to the control panel by its own cable wire. This system are mainly used specially in smaller property.

2. Addressable fire alarm system

a. Addressable fire alarm system has the same detection principle, except that each detector can be given a set address that can help to identify the exact location of the detector that initiated the alarm, that can be seen in the fire alarm control panel. Addressable fire alarm system saves a lot of wire compare to conventional system, since the devices can share one cable wires up to the last device. Both ends of the wire is loop connected to the fire alarm control panel. This system are very suitable for large and high buildings, since they are able to pinpoint exactly which devices are triggering the alarm.

3. Wireless fire alarm system

a. Wireless fire alarm system, is hassle-free to install compare to conventional and addressable since it does not use any conduit and cable wires. However, even though you saved a lot of money in material and labor cost, the hardware and programming are higher than the wired systems. The devices are battery powered and can be placed anywhere and can be easily relocate if needed.

Fire Alarm System Components
The main component of fire alarm system are the following:

1. Fire Alarm Control Panel

Fire Alarm Control Panel is the brain or central hub of a fire alarm system. It displays the location and status of the alarm devices, and it gives precise location of the device that cause the alarm.

2. Fire Alarm Initiating Devices

Fire Alarm Initiating Devices are the devices that detects signs of fire and triggers the alarm. They are connected to the fire alarm system control panel. Initiating devices includes smoke detectors, heat detectors, flame detectors, manual pull station and fire sprinkler water flow switch.

3. Fire Notification Devices
Fire Notification Devices are the audible and visual devices in fire alarm system, it includes fire alarm horn, speaker and bell. Its main function is to alert people at risk in the event of a fire, that is why it is considered as the most important components of fire alarm system.

4. Primary Power Supply
Primary power supply is typically supplied by the local utility, and also from generators that are located in remote areas wherein the electrical grid is not available.
5. Backup Power Supply
Backup power supply commonly supplied by batteries and stored internally or adjacent to main fire alarm control panel or can be also from generator. It must also provide a 24 hours of power supply to control panel in case of power shortage.

How Fire Alarm System Works?

In an event of a fire emergency, the fire alarm system main role is to detect fire and to alert people at risk inside the building and emergency response team to control the situation as fast as possible. Fire alarm system key functions is to detect (by the use of smoke detectors, heat detectors, flame detectors, etc.) , alert (by the use alarm horn, speaker, and bell), and monitor (control panel).

Fire Alarm System Maintenance
A functioning and well-maintained fire alarm devices can help reduce injuries, save lives and properties. The fire safety systems inspection, routine maintenance, and testing will help one in keeping in compliance with the local/state fire inspectors and also their insurance carrier. To keep the best condition of the fire alarm devices, it is advisable to keep a scheduled maintenance and check the following:

1. Checking of physical appearance of the fire alarm devices

2. Smoke Detectors should be cleaned & tested for sensitivity levels (addressable type)

3. Fire alarm control panel should be tested for all alarm, trouble, supervisory, reset & silence function

4. Checking of the devices power supply

5. Checking/ replacement of batteries

6. Checking/ removal of any obstruction on the devices that may cause false alarm or malfunctioning

7. Checking if the alarm is audible

8. Devices must be replaced when exceeded 10 years from the manufactured date

Emergency system

ASENWARE Centralized Monitoring Emergency Luminaire System is designed for managing, monitoring and controlling emergency lights automatically.

Fire Suppression System

ASENWARE Fire Pump Series provide fire departments or private users with the ability to pump from any water source.

Fire Fighting System

At ASENWARE, you can choose the best quality of fire fighting equipment like extinguisher, hose reels, fire monitors, nozzles and hose pipes.
Project
Newsroom
About Us

Contact us

Factory

Technical RFQ
Contact
Technical FAQ

Wireless Fire Alarm System

Home > Products > Wireless Fire Alarm System

Wireless Addressable Smoke and Heat Detector AW-D605L

wireless addressable smoke & heat detector is mainly designed for wireless control system. The detector most advanced optical sensing chamber and temperature sensing with the fastest response and high...

INQUIRY

wireless addressable smoke & heat detector is mainly designed for wireless control system. The detector most advanced optical sensing chamber and temperature sensing with the fastest response and highest
sensitivity. With wireless network alarm function, it can form a wireless local area network alarm system through the panel. Wireless connection, support for electronic coding, easy installation and construction.

2.Product Features

2.1 Easy to install, mounting bracket included

2.2 High quality durable sensor

2.3 Loud 85dB alarm and LED warning indicator

2.4 Excellent reliability and high stability

2.5 Suitable for all families and other places where needs

2.6 The battery is used for ten years, and it does not need to be replaced for ten years of normal operation.

2.7 Meets all requirements of latest EN standard Technical parameters

3. Technical Parameters

3.1 Operating voltage: 3VDC (with battery CR17450 / CR17455)

3.2 Operating current: monitoring status≤8uA, alarm status≤120mA

3.3 Operating Frequency: 433MHz (418MHz to 448MHz)

3.4 Wireless transmit power: +20dB

3.5 Smoke Alarm Sensitivity: 0.18-0.3dBM

3.6 Fix temperature Alarm:57°C (135°F) A2R

3.7 Rate of rise Alarm：≥10℃/2M A2R

3.8 Low battery alarm voltage：≤ 2.4V

3.9 The battery is used for ten years, and it does not need to be replaced for ten years of normal operation.

3.10 Battery Type: A Panasonic Corporation（Panasoic Energy Co.,Ltd)-CR17450/CR-AGF;B Huzhou Huiderui

Litium Battery Technology. Co,. Ltd)-CR17450.

3.11 Alarm SPL: ≥85dB @3m

3.12 Operating temperature: 0℃～40℃，Relative humidity: ≤93%(non-condensing)

3.13 Application: For indoor use only

3.14 Standard Number Ref:BS5446-2

3.15 Materials and colors: ABS, white

3.16 Size: φ105mm*105mm*50.2mm (Figure1)

3.17 Weight: about 120g

4. Mounting Base

AW-D605L should comply with all local codes. Shown in Figure 2, install the base of the AW-D605L on the wall.

And then insert the main body into the base.

The base dimensions of 105mm*105mm*41mm(Length*Width*Height),mounting hole diameter φ2mm, fixing the

hole spacing is 42mm, shown in Figure 3.

5. Operation

Test: When there is no fire alarm, you can press the test button to test. When pressed, both the buzzer and

LED light work intermittently (beep and LED blink)

Mute: When the detector is in the alarm state, press the button on the cover to mute the buzzer, the silence

period for each press is 5 minutes, and the longest does not exceed 15 minutes; if there is still a fire

alarm at the end of each silence period The alarm will be retriggered. Normal work: LED flashes once every 50 seconds and battery power is detected once, smoke density is

detected once every 4 seconds, and the buzzer does not sound. Low battery/failure: LED flashes once every 50 seconds, buzzer beeps once

Wireless Addressable Smoke and Heat Detector Technical Parameters:

Operating Voltage	3VDC (with battery CR17450 / CR17455)
Operating current	monitoring status≤8uA, alarm status≤120mA
Operating Frequency	433MHz (418MHz to 448MHz)
Smoke Alarm Sensitivity:	0.18-0.3dBM
Fix temperature Alarm:	57°C (135°F) A2R
Rate of rise Alarm：	≥10°C/2M A2R
Wireless transmit power	+20dB
Alarm level	≥85dB /3m
Protection class	IP30
Indicator	Normal: blinking Alarm: lighting
Environmental	Temperature range: 0 to 40°C (32~104°F) Humidity: ≤93% RH, non-condensing
Materials and colors	ABS, white
Mating Host	AW-FP100 addressable fire alarm control panel
Encoding	Address from 1 to 250 optional
Size	105mm* 105mm* 50.2mm (with cover)
Weight	About 120g