Since 2005, Fire Alarm System And Fire Suppression System Manufacturer&Whole Solution Provider
We supply whole fire alarm and suppression system include conventional fire alarm system, addressable fire alarm system, emergency light system, FM200 gas suppression system, fire pump, fire hose reel and cabinet.
Select Language
> Select Language
Deutsch
Italiano
Dansk
Nederlands
Russian
French
Filipino
Spanish
Arabic
Japanese
Portuguese
Indonesian
Turkish
Vietnamese
Khmer
Lao
Thai
Malay
Nepalese
Swedish
  • Home
  • Products
    Fire Alarm System
    Fire alarm system plays an important part of the fire and life safety of building and its occupants. Fire alarm system main function is to detect a fire at a sufficiently early stage so that the people who are at risk can made safely either by escaping as fast as possible or extinguishing the fire that can also reduce or prevent the property damage. Therefore, a reliability and functionality of fire alarm system as a whole is very important. 

    The following are the different types of the Fire Alarm System:

    1. Conventional fire alarm system

    a. Conventional fire alarm system uses physical cabling to connect several detectors and call points. Conventional fire alarm system has no way to identify immediately the exact location of the fire, but can be arranged in “Zones” to easily identify the location of the cause of the alarm. Its devices are cheaper but will consume more cable wires compare to addressable, since each device will be connected to the control panel by its own cable wire. This system are mainly used specially in smaller property.
    conventional fire alarm system Wiring diagram 

    2. Addressable fire alarm system

    a. Addressable fire alarm system has the same detection principle, except that each detector can be given a set address that can help to identify the exact location of the detector that initiated the alarm, that can be seen in the fire alarm control panel. Addressable fire alarm system saves a lot of wire compare to conventional system, since the devices can share one cable wires up to the last device. Both ends of the wire is loop connected to the fire alarm control panel. This system are very suitable for large and high buildings, since they are able to pinpoint exactly which devices are triggering the alarm.
    addressable fire alarm system Wiring diagram

    3. Wireless fire alarm system

    a. Wireless fire alarm system, is hassle-free to install compare to conventional and addressable since it does not use any conduit and cable wires. However, even though you saved a lot of money in material and labor cost, the hardware and programming are higher than the wired systems. The devices are battery powered and can be placed anywhere and can be easily relocate if needed.
    wireless fire alarm system

    Fire Alarm System Components 

    The main component of fire alarm system are the following:
    1. Fire Alarm Control Panel
    Fire Alarm Control Panel is the brain or central hub of a fire alarm system. It displays the location and status of the alarm devices, and it gives precise location of the device that cause the alarm.
    fire alarm control panel
    2. Fire Alarm Initiating Devices
    Fire Alarm Initiating Devices are the devices that detects signs of fire and triggers the alarm. They are connected to the fire alarm system control panel. Initiating devices includes smoke detectors, heat detectors, flame detectors, manual pull station and fire sprinkler water flow switch.
    Fire Alarm Initiating Devices
    3. Fire Notification Devices
    Fire Notification Devices are the audible and visual devices in fire alarm system, it includes fire alarm horn, speaker and bell. Its main function is to alert people at risk in the event of a fire, that is why it is considered as the most important components of fire alarm system.
    Fire Notification Devices
    4. Primary Power Supply
    Primary power supply is typically supplied by the local utility, and also from generators that are located in remote areas wherein the electrical grid is not available. 
    5. Backup Power Supply
    Backup power supply commonly supplied by batteries and stored internally or adjacent to main fire alarm control panel or can be also from generator. It must also provide a 24 hours of power supply to control panel in case of power shortage.

    How Fire Alarm System Works? 

    In an event of a fire emergency, the fire alarm system main role is to detect fire and to alert people at risk inside the building and emergency response team to control the situation as fast as possible. Fire alarm system key functions is to detect (by the use of smoke detectors, heat detectors, flame detectors, etc.) , alert (by the use alarm horn, speaker, and bell), and monitor (control panel). 

    Fire Alarm System Maintenance 

    A functioning and well-maintained fire alarm devices can help reduce injuries, save lives and properties. The fire safety systems inspection, routine maintenance, and testing will help one in keeping in compliance with the local/state fire inspectors and also their insurance carrier. To keep the best condition of the fire alarm devices, it is advisable to keep a scheduled maintenance and check the following: 
    1. Checking of physical appearance of the fire alarm devices
    2. Smoke Detectors should be cleaned & tested for sensitivity levels (addressable type)
    3. Fire alarm control panel should be tested for all alarm, trouble, supervisory, reset & silence function
    4. Checking of the devices power supply
    5. Checking/ replacement of batteries
    6. Checking/ removal of any obstruction on the devices that may cause false alarm or malfunctioning
    7. Checking if the alarm is audible
    8. Devices must be replaced when exceeded 10 years from the manufactured date

     

    Emergency system
    ASENWARE Centralized Monitoring Emergency Luminaire System is designed for managing, monitoring and controlling emergency lights automatically. 
    Fire Suppression System
    ASENWARE Fire Pump Series provide fire departments or private users with the ability to pump from any water source.

    Fire Fighting System
    At ASENWARE, you can choose the best quality of fire fighting equipment like  extinguisher, hose reels, fire monitors, nozzles and hose pipes.
  • Project
  • Newsroom
  • About Us
    Contact us
    Factory
    Technical RFQ
  • Contact
  • Technical FAQ
Project
Home > Project
Asenware FM200 system used in Clean Water Da river Hanoi Vietnam project
2019-08-23
Asenware FM200 system used in Clean Water Da river Hanoi Vietnam project
Project Location: Hanoi Vietnam
Building name: Clean Water Da river
 


Introduction: Clean Water Da river Hanoi Vietnam project  Mainly used is the fm200 system,
Asenware FM-200 Fire extinguishing system are designed for total flooding to protect high value assets,Colorless and non-toxic gas, suitable for normally occupied area, where there is any
chance of presence of human present,FM200 fire suppression is also known as HFC227ea,
FM200 is awaterless fire protection system, it is discharged into the risk within 10 seconds
and suppresses the fire immediately.


Asenware FM-200 Benefits
Use less space, save cost
Compare CO2 system,FM200 system need only small amount of agent to put out fire,
so use less cylinder
More quick to put out fire
Within 10 seconds achieved, put out fire before they cause much damage)Clean agent,
better protection room equipment
Life safety
The FM200 agent put out fire on a molecular level, low pressure, no harm to human


FM200 - How it works
N2 network pipe type FM 200 system:
1. automatic control 
2. manual control 
3. mechanical emergency start (need to be used in case of automatic system failure only ,
    care must be taken when operate manually.)

Professional engineers design solutions

1. what is the usage of room?
2.Is there any sub-floor or above ceiling in the room? 
3. please inform us the size of room,
We will design the best solution for you.
 
 
 

Project
Asia
Europe
Africa
North America
South America
Antarctica
Oceania
Contact us
UK-Marketing Center
ASENWARE LTD
Address: 6 Prospect Way, Royal Oak Industrial, Estate Daventry,
Northamptonshire, England, Nn118pl.
 
Tel:  0086 13922805301
 
China-R&D and Supply Chain Center Zhongshan Guta Fire Equipment Technology Co., LTD
Address: 4F,10#,Xingye Rd.,Huoju District, Zhongshan City, Guangdong Province, China


Tags
Sitemap
Copyright © 2021 Asenware Ltd.. All Rights Reserved.