Since 2005, 16 Years Fire Alarm System Suppression and Manufacturer&Whole Solution Designer
We supply whole fire alarm and suppression system include conventional fire alarm system, addressable fire alarm system, emergency light system, FM200 gas suppression system, fire pump, fire hose reel and cabinet.
  • Home
  • Products
    ASENWARE Conventional Fire Alarm System has obtained lpcb ce certificationconsists, The system has Conventional Fire Alarm Control Panel, Smoke Detector ,Heat Detector , Beam Smoke Detector,Entrance LED Indicator etc composed
    ASENWARE Addressable Fire Alarm Control System are intelligent system which are designed to make it suitable for most of applications. It’s user friendly functionality makes it suitable to program and configure the devices. 7 ” touchscreen display gives the information for fire alarm, trouble , supervisory and other related information all the time.This system fully complied with the requirement of EN 54-2 and EN 54-4.
    ASENWARE Wireless fire alarm system features: Can connect both wired and wireless detectors Each zone can connect up to 20 wireless detectors and 20 wired detectors
    ASENWARE Fire Pump Series provide fire departments or private users with the ability to pump from any water source.

    ASENWARE Centralized Monitoring Emergency Luminaire System is designed for managing, monitoring and controlling emergency lights automatically. 
    ASENWARE fire fighting telephone system is the special communication equipment for fire fighting
  • Project
  • Newsroom
  • About Us
  • Contact
  • Technical RFQ
LPCB approved addressable fire...
Home > Products > LPCB approved addressable fire alarm control system
LPCB Addressable Fire Alarm System Input Output Module AW-D319
The AW-D319 Addressable I/O Module (AW-D319 for short) is used with AW-FP300 fire alarm control panel. It is mainly used to realize an output control for fire linkage equipment (such as smoke dampers,...
  • The AW-D319 Addressable I/O Module (AW-D319 for short) is used with AW-FP300 fire alarm control panel. It is mainly used to realize an output control for fire linkage equipment (such as smoke dampers, blow valves and fire dampers) and receive the feedback signals of the fire linkage equipment so that a judgment on whether or not the fire linkage equipment is operating normally can be done.
  • LPCB Addressable Fire Alarm System Input Output Module Feature:

    1. Executive standard: EN54-18
    2. Operation voltage: loop DC24V (polarity-insensitive);power DC24V(polarity-insensitive)
    3. Quiescent current: loop current<0.8mA; power current<2mA
    4. Action current: loop current<5mA; power current<15mA
    5. Capacity of the output control contact: 1A@DC30V
    6. Operation indicator: The inspection indicator will blink once about every 12 seconds in the inspection status or remain lit in
    the output status; the input indicator will remain lit in the feedback status.
    7. Operating environment: Temperature: -10ºC ~ 55ºC; RH: ≤95% (40 ºC±2ºC, without condensation)
    8. External dimensions: 86×86×41(mm,With base)
    9. Weight: about 148g(With base)
  • LPCB Addressable Fire Alarm System Input Output Technical parameters:


    Operating Voltage
    Signal Loop 24V(18V~28V)
    Power 24VDC(20VDC~28VDC)
    Standby Current Loop<0.8mA ; Power<2mA
    Action Current Loop<5mA ; Power<15mA
    Output Capacity 1A@DC30V
    Input Mode Setting NC or NO input mode can be set by the jumper JP4.
    Programming Method Electronically addressed
    Code Range One address within 1~324.
     
    Indicators
    Inspection indicator: l blink once about every 12 seconds in the inspection status or remain lit in the output status;
    Input indicator : remain lit in the feedback status.
    Operating Temperature -10℃~+55℃
    Relative Humidity ≤95% , non-condensing
    Material of Enclosure ABS
     
    Dimension (L×W×H)
    86mm×86mm×41mm
    (with base)
    Mounting Hole Distance 60.5mm
    Weight About 148g (with base)