Conventional Fire Alarm Control System LPCB Approved
4 wire heat detector 60vdc with relay
The detector that initiated the alarm condition will have its red LED and relaylatched until reset by panel.
INQUIRY
Product overview
The detector that initiated the alarm condition will have its red LED and relaylatched until reset by panel. Two LEDs on each detector provide local 360°visible alarmindication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm.LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The detector has an automatic reset function.

Product Videos:
Conventional Fire Alarm System Introduction and Testing (Arabic)
https://www.youtube.com/watch?v=pKtzkVs7Fhc&t=8s

Conventional fire alarm system shared by partners from Cameroon
https://www.youtube.com/watch?v=4cTRuMoxdF4&t=8s
Product Features
 Features 
1. Surface mounting
2. LED indicator 
3. Complete functional test with every activation 
4. Meets all requirements of latest EN54-5:2017
Technical parameters
Main Voltage 24-60VDC
Operating current(@ 60VDC) NO Standby current≤1.2mA, Alarm current≤8mA
 NC Standby current≤5mA, Alarmcurrent≤4mA
Application For indoor use only
Wiring Terminal 6: DC Input Terminal 5: DC Input
Terminal 3: Alarm output Terminal 2: Alarm output
Protection class IP30
Environmental Class A temperature range: -10 to 50°C (14~122°F)
Humidity: 5 to 95% RH, non-condensing
Alarm relay output capacity 100mA(Max) @60VDC( for resistive load)

Download
BACK