Conventional Fire Alarm Control System LPCB Approved
4 wire smoke and heat detector 48vdc with relay
The red LED on the detector provides a local 360°visible alarm indication. The detector that initiated the alarm condition will have its red LED and relay latched until reset by panel.
INQUIRY
Product overview
The red LED on the detector provides a local 360°visible alarm indication. The detector that initiated the alarm condition will have its red LED and relay latched until reset by panel. They fash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit.

Product Videos:

Conventional Fire Alarm System Testing
https://www.youtube.com/watch?v=fGZnalcnlg0

1 Zone Fire Alarm Control Panel fire alarm system control
https://www.youtube.com/watch?v=iu0OXtq6WhI
Product Features
Features 
1. Low Standby current for continuous monitoring 
2. Relay output 
3. Dual LED design provides 360° viewing angle 
4. Meet requirement of EN54-5:2017 & EN54-7:2018
Technical parameters
Application For indoor use only
Smoke alarm sensitivity 0.18~0.3dB/m
Fixed temperature alarm 57℃(135°F) A2R
Alarm relay output capacity 500mA @DC30V
Environmental Temperature range: -10~50°C (14~122°F)
Humidity: 5 to 95% RH, non-condensing

 


 
 
Download
BACK