AW-EVC100 emergency voice evacuation controller is suitable for communication and dispatch in case of fire or emergency in the building. When a fire occurs in the application scene, the emergency evacuation audio will be played, and the on-site personnel can make a speaker call through the controller microphone to schedule the on-site evacuation.

There is an emergence evacuation button that can be manually operated to activate the fire alarm， displaying with alarm information in editable language
Equipped with EMC Microphone which issued to evacuate people When it is in emergency situation
3.2-inch LCD screen and silicon buttons for visual operation
Provided with various source input including 2 AUX and 2 MIC
Supports playback of audio in MP3, WAV format with USB flash disk and Bluetooth
There are 20 zones of fire detection input, which are activated one by one with the 20 zones of speaker zones when the fire alarm is triggered, and when the fire disappears it will automatically recover.
Each broadcast zone needs to connect to constant voltage loudspeaker with 2, 3 wire connection
Autonomously control the opening and closing of the broadcast zone
There are 120 fire zones that can be linked to the broadcast zone via CAN in the Fire Alarm Control Panel ( like FP128, FP200 ). If the linkage is preseted in the EVC100, the evacuation audio will be played when EVC100 receive the fire signal from he Fire Alarm Control Panel.
Each broadcast zone can be set with an individual timer to delay playing the evacuation audio when received fire signal
Support a maximum of 60 broadcast zones by connecting to EV603
2 loops of paging input interfaces, which can connect two paging devices, and can broadcast notification and audio through Paging at a long distance.
Support AC power supply and 24V battery power supply, can automatically identify and switch, AC power supply priority
1 monitoring speaker, which can monitor the audio of the input audio source
Built-in SD card, used to store emergency alarm audio files ( MP3, WAV format)

Technical Parameters

Rated input voltage	~ 100V-260V, 50/60Hz
Maximum current	T3.15A
Working environment	Relative humidity (<95%) at -20 ~40 ℃, no condensation)
Standby Audio Output	Balance 1V,<0.3% 1KHz
MIC1/MIC2 input sensitivity and frequency response	Balance,10mV/80Hz~10KHz±3DB
MIC1-2 input SNR	>70dB
AUX1-2 input sensitivity and frequency response	Unbalance,350mV/20Hz~20KHz±3DB
AUX1-2 Input SNR	>90dB
Paging Input Frequency response	20HZ-20KHZ±3DB
Alarm Input	20 channel
Paging Distance	>=600m(with CAT-5E OFC cable)
Remote MIC communication	CAN bus
Slave Controller Communication	RS485 bus
Battery Input Voltage and Current	24V DC±20%/3A