Asenware AW-D103 is combination heat and smoke detector, it is an intelligent addressable detector, which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given specific ID, which allows the panel to continuously monitor specific detector location (point). It reduces the maintenance cost and makes it easier to maintain the system. It provides fire signal when both conditions are satisfied which reduces the chances of false alarm. The heat sensing portion utilizes a proven thermistor for accurate and reliable heat detection.

Addressable Heat and Smoke Detector Combination Detector Features:

• Addressable-analog communication
• Low standby current for continuous monitoring(≤2.5mA)
• Two-wire connection
• Two LEDs (RED), blinks in normal condition and becomes steady during fire alarm condition.
• Remote test from Panel

Spacing
Spacing of detector must be followed by standard EN 54 or NFPA 72. NFPA 72 suggests for low airflow application spacing of 9.1 m for ceiling height up to 3.15 m can be applicable. However, please follow the specific codes and local codes for specific applications.

Addressable Heat and Smoke Detector Combination Detector Technical parameters:

Model No.	AW-D103
D/C	1712
Operating Voltage Range	18V-28V DC
Alarm Current	≤3mA
Work Current	≤2.5mA
Temperature	-10℃ to 50℃
Smoke Sensitivity	0.1-0.15dB/m
Fix Temperature Range	57℃ A2R
Rate of Rise Alarm	7.1℃/5S
Standard Number Ref	EN 54-5:2000
Size	99.80mm
Terminals Connection	No 6: Remote Indicator+ No 3: Remote Indic
	No 2: Loop IN+  No 5: Loop IN-

 

Smoke and Heat Detector Installation

AW-D103 addressable detector use a separate base to simplify the installation and
maintenance. For proper installation, terminal connections to be followed as shown
below.


*All dimensions are in mm