Since 2005, Fire Alarm and Suppression System Manufacturer & Whole Solution Designer,
We supply whole fire alarm and suppression system include conventional fire alarm system, addressable fire alarm system, emergency light system, FM200 gas suppression system, fire pump, fire hose reel and cabinet.
  • Home
  • Products
    The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 24 standard. 
    Asenware FP300 series is a LPCB addressable fire alarm system with one loop of 324 addressable points, comply with EN 54 standard.
    Smoke Detector is a device that senses smoke, typically as an indicator of fire.
    ASENWARE Heat Detector is photo-electronic detector using a state-of-the-art optical sensing chamber. 
    ASENWARE Smoke and Heat Detector is photo-electronic detector using a state-of-the-art optical sensing chamber. 
    Voice Evacuation Control Panel and Speakers
    Fire Telephone is a new fire special communications equipment when the fire accident.
    ASENWARE units are designed for the purpose of alerting audio and visual awareness to an emergency situation.
    Conventional Manual Call Point is designed for conventional fire alarm system to report fire in emergency condition 
    Fire Bell is the fire alarm, a fire alarm device, generally used for more staff in public areas
    ASENWARE Reflex Beam Smoke Fire Detector, being designed for fire prevention, is a long interval one and used with the fire alarm controller
    ASENWARE Flame Detector provides a new generation of flame detection capability and technical standards
    Fire Proof Cable is used where critical circuits need to function to keep safety equipment running even when exposed to extreme heat or fire. 
    AW-AFP2189 is a new type of analog fire alarm control panel which has 324 alarm control points 
    ASENWARE Fire Pump Series provide fire departments or private users with the ability to pump from any water source.
    ASENWARE FM200 (Heptafluoropropane, HFC-227ea) fire extinguishing system is a gas fire, automatic control and fire detection.
    ASENWARE Explosion-Proof Series is a indispensable equipment in explosion-proof fire alarm system.
    ASENWARE Centralized Monitoring Emergency Luminaire System is designed for managing, monitoring and controlling emergency lights automatically. 
    ASENWARE Other Fire Alarm Accessories
  • Project
  • Newsroom
  • Company
  • Contact
Conventional Fire Alarm Contro...
Home > Products > Conventional Fire Alarm Control Panel
IR3 Explosion-proof infrared flame detector

  • 1.A715 Series flame detectors (short-called the flame detector as follows) provide a new generation of fire detection capability and technical standards.The flame detectors which adopt a specially designed pieces of narrow-band infrared sensors and Blind type solar daylight UV sensors can distinguish the real flame radiation and interference sources effectively and reduce the impact of environmental factors on detector extremely by means of the built-in 16-bit microprocessor and proprietary signal algorithm processing .The detector can set 5 different Sensitivity levels in order to meet more needs in different location.We collected a large number of experimental data through market research and customers' feedback. We have made a big improvement based on its existing in the hardware circuitry and software algorithms .
    A715 Series flame detectors contain the following two kinds: A715/IR3    three-wavelength infrared flame detector
    A715/UVIR3double infrared and single ultraviolet flame detector

  • Built-in16-bit high-speed, low-power, high-performance, high-precision data processing chip. Adopt narrow-band infrared sensors and patented solar-blind UV sensor.
    It has multi-level sensitivity in order to meet more occasions. Also they can detect flammule earlier.
    Detection angle can be able to reach to 110 Degree/IR2. Detection range can be able to reach to 50m/IR3.
    The perfect algorithm combines optimally the flame detection and false alarm capabilities.
    Detector is fit to a variety of fuels. Apply to heavy industry applications.
    Explosion-proof designs can be used in hazardous area of industrial sites. Low maintenance cost, easy to update and improve.


  • Operating voltage: DC24V (range DC18V~30V)
    Operating Current: Monitor≤25mA , Alarm≤35mA(relay) Angle range:110°
    Sensitivity level:1~3 level adjusted
    Detection range ≤50m Output:
    Delay, Alarm relay, normally open contact output, 1A@30VDC. Operating Temperature: -10°C~55°C.
    Operating Humidity: 0~95%RH.
    Storage temperature: -40°C~85°C.
    Explosion proof level: Exd IIC T6(Explosion proof) Protection level:IP66.
    Housing material: Aluminium alloy, painted surfaces.

Addressable Fire Alarm Series Conventional Fire Alarm Control Panel LPCB Fire Alarm System Smoke Detector Heat Detector Smoke and Heat Detector Voice Evacuation Control Panel System
Fire Telephone System Strobe Sounder Manual Call Point Fire Bell Beam Smoke Detector Flame Detector Fire Cable Addressable Fire Alarm System Water Fire Suppressing System Gas Fire Suppressing System Explosion-Proof Series Centralized Monitoring Emergency Lumi Other Fire Alarm Accessories