Since 2005, Fire Alarm and Suppression System Manufacturer & Whole Solution Designer,
We supply whole fire alarm and suppression system include conventional fire alarm system, addressable fire alarm system, emergency light system, FM200 gas suppression system, fire pump, fire hose reel and cabinet.
  • Home
  • Products
    Asenware Series Fire Alarm Control System are intelligent system which are designed to make it suitable for most of applications. It’s user friendly functionality makes it suitable to program and configure the devices. 7 ” touchscreen display gives the information for fire alarm, trouble , supervisory and other related information all the
    time.
    This system fully complied with the requirement of EN 54-2 and EN 54-4.
    The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 24 standard. 
    Asenware FP300 series is a LPCB addressable fire alarm system with one loop of 324 addressable points, comply with EN 54 standard.
    Smoke Detector is a device that senses smoke, typically as an indicator of fire.
    ASENWARE Heat Detector is photo-electronic detector using a state-of-the-art optical sensing chamber. 
    ASENWARE Smoke and Heat Detector is photo-electronic detector using a state-of-the-art optical sensing chamber. 
    Voice Evacuation Control Panel and Speakers
    Fire Telephone is a new fire special communications equipment when the fire accident.
    ASENWARE units are designed for the purpose of alerting audio and visual awareness to an emergency situation.
    Conventional Manual Call Point is designed for conventional fire alarm system to report fire in emergency condition 
    Fire Bell is the fire alarm, a fire alarm device, generally used for more staff in public areas
    ASENWARE Reflex Beam Smoke Fire Detector, being designed for fire prevention, is a long interval one and used with the fire alarm controller
    ASENWARE Flame Detector provides a new generation of flame detection capability and technical standards
    Fire Proof Cable is used where critical circuits need to function to keep safety equipment running even when exposed to extreme heat or fire. 
    AW-AFP2189 is a new type of analog fire alarm control panel which has 324 alarm control points 
    ASENWARE Fire Pump Series provide fire departments or private users with the ability to pump from any water source.
    ASENWARE FM200 (Heptafluoropropane, HFC-227ea) fire extinguishing system is a gas fire, automatic control and fire detection.
    ASENWARE Explosion-Proof Series is a indispensable equipment in explosion-proof fire alarm system.
    ASENWARE Centralized Monitoring Emergency Luminaire System is designed for managing, monitoring and controlling emergency lights automatically. 
    ASENWARE Other Fire Alarm Accessories
  • Project
  • Newsroom
  • Company
  • Contact
Automatic Gas Extinguisher Con...
Home > Products > Automatic Gas Extinguisher Control Panel
Automatic Gas Extinguisher Control Panel AW-GEC2169
AW-GEC2169 with a new design, easy to operate, metal box opening and closing door with visible glass window, make the Panel running more safe,The automatic extinguisher control panel AW-GEC2169 is des...
  • The automatic extinguisher control panel AW-GEC2169 is designed execute European standards of EN54-2 and EN54-4 Fire Detection and Fire Alarm systems clause,and Control and Indicating Equipment EN12094-1 firefighting system standards.
    EN54-2 Fire detection and fire alarm systems  part 2: control and indicating equipment 
    EN54-4 Fire detection and fire alarm systems  part 4: power supply equipment 
    EN12094-1 Fixed firefighting systems - Components for gas extinguishing systems
    Requirements and test methods for electrical automatic control and delay devices
    AW-GEC2169 with a new design, easy to operate, metal box opening and closing door with visible glass window, make the Panel running more safe.
  • The AW-GEC2169 automatic gas fire extinguisher panel has the following features:

    Alarm input : two alarming zone signal input , 16 detectors could be connected to each zone
    EM valve output : control the output of EM valve.
    Panel output: line fault output / alarm output / fire extinguishing signal output/24VDC output
    Power output: resettable 24VDC output, 200mA current limit protection
    Automatic power switching: 220V AC power and standby battery power can be switched automatically.
    Three levels of access control (view, operation, settings)
    Fault detection with display: Real-time detect working condition of input, output, system, power, ground, fuse,and so on.
    Manually disable function: Manually disable the Panel functions and zones devices.
    Evacuation: Manually activate the fire alarm devices.
    Silence operation: Manual silence the horns alarm and panel buzzer .
    Delay time setting: You can manual set the Panel reseting time and Release delay time.
    Panel Security Protection : outside cabinet with Visible glass window of opening and closing door .
    tability: long-term rigorous testing before leaving the factory, the Panel is stable, safe and reliable;
  • AC INPUT 220VAC 50HZ +10%
    -15%
    DC OUTPUT at Power Board 24VDC (19V-28V) and 5VDC (4.9V-5.1V)
    Voltage for MCU 5V for power board MCU, 3.3V for others
    Current at 24VDC from PSE <450mA standby current
    Maximum current from PSE 1.4A except batteries charge
    Batteries current 1.85A maximum, current limited
    Auxiliary output 24VDC, 200 mA max, current limited
    Extinguishant release delay time Adjustable 0 to 60seconds(5 second steps)
    Imin, Imax.a and Imax.b according to EN54-2 Imin=340mA, Imax.a=424mA, Imax.b=1.4A
    Batteries 2*12V/ 2.3Ah sealed lead acid gel, self-regulated
    Battery replace Resistance 1.6Ω±10% if needed
    Battery low-voltage protection 21V
    The maximum and minimum electrical ratings for each input and output Detectots / zone lines: 15.2V-28V     Sounder lines:19-28V
    Fire protection/Fire routing lines:19-28V  Fault routing lines:18-28V
    Detectors wiring allowed each zone 16 points
    Max points (detector and MCP) per CIE 32 points
    Zone alarm current 6mA minimum/ 27mA maximum
    Sounder output 200mA maximum
    Fire routing/ Fault routing 200mA maximum each terminal
    Communication protocol 2 wires RS485 bus system
    EOL resistor for zone, inputs(Except for main power) and outputs 6.8K 1W
    Wires for 220V AC IN (recommended) 16AWG
    Wires connect power board to interface board (recommended) 20AWG
    Wire for main board wiring with interface board (recommended) 28AWG
    Fuse on power board 3A/ 250V Glass tube fuse 5*20(mm) Fast/quick blow
    Fuses on interface board(general outputs) 0.2A /250V Glass tube fuse 5*20(mm) Fast/quick blow [*5pcs]
    Fuse on interface board(Main Power) 2A/ 250V Ceramic tube fuse 5*20(mm) Slowly blow
    Fuse on interface board(EM valve) 1.5A/ 250V Glass tube fuse 5*20(mm) Fast/quick blow
    Environmental Class A temperature range: -5 to 40°C (23~104°F)
    Humidity: 5 to 95% RH, non-condensing
    Terminal blocks rating All terminals rated for 12 to18 AWG
    (0.75 to 2.5 mm2)
    Wires between interface board (Panel)and Detector  (recommended) 2-core shielded cable for 12 to18 AWG
    (0.75 to 2.5 mm2)

Products
Addressable Fire Alarm Control System
Conventional Fire Alarm Control Panel LPCB Fire Alarm System Smoke Detector Heat Detector Smoke and Heat Detector Voice Evacuation Control Panel System
Fire Telephone System Strobe Sounder Manual Call Point Fire Bell Beam Smoke Detector Flame Detector Fire Cable Addressable Fire Alarm System Water Fire Suppressing System Gas Fire Suppressing System Explosion-Proof Series Centralized Monitoring Emergency Lumi Other Fire Alarm Accessories